Skip to main content
All CollectionsDevicesSamsung Smart Signage Platform (SSSP)
Set up a D Series Samsung Smart Signage Platform Display (SSSP v2)
Set up a D Series Samsung Smart Signage Platform Display (SSSP v2)

Guidance on setting up a DB-D, DM-D, DH-D display for the first time with embed signage

Drew Harding avatar
Written by Drew Harding
Updated over a year ago

To set up a D Series SSSP display for the first time with embed signage, follow these steps:

  1. Select your language

  2. Select Landscape or Portrait as desired

  3. Select Off (Recommended)

  4. Choose either Wired or WiFi connection options

  5. Set the Date and Time > select Next

  6. Choose URL Launcher then enter a URL from below for the desired orientation:
    Landscape: http://embed.cloud
    Portrait: http://embed.cloud/p
    Portrait reverse: http://embed.cloud/pr
    Landscape reverse: http://embed.cloud/lr 

  7. Select ok once set up is complete

Before Launching

Before launching embed signage on the D series SSSP Displays, carry out these steps:

When the URL launcher menu screen appears, please press the ‘Menu’ button on your remote and follow these simple steps:
• System > Power Control > Auto Power On set to On
• System > Power Control > Max Power Saving set to Off
• System > Power Control > Standby Control set to Off
• System > Power Control > Network Standby set to On

Using the Source Input Widget?

If using the SSSP source input widget (HDMI into a zone for example). You must ensure that the following settings are applied to the source of the screen.

Press ‘Exit’ on the remote, then select the source (i.e. HDMI) press ‘Menu’ and apply these settings
• System > Power Control > Auto Power On set to On
• System > Power Control > Max Power Saving set to Off
• System > Power Control > Standby Control set to Off

Did this answer your question?