Skip to main content
All CollectionsDevicesLG WebOS
How to set up embed signage on LG WebOS Displays (2.0, 3.0, 3.2+, 4.0+ and 6.0)
How to set up embed signage on LG WebOS Displays (2.0, 3.0, 3.2+, 4.0+ and 6.0)

Use embed signage with WebOS for Signage displays running 2.0 and above - here's how you need to configure the device to run embed signage.

Drew Harding avatar
Written by Drew Harding
Updated over 2 years ago

The first step for setting up any WebOS for Signage display is to ensure the time and date are correct and you have a working network connection. 

Once you have an internet connection on the device and the time / date are correct, you'll need to access the Server Settings for the device, which are accessed differently depending on which version you have:

For LG WebOS 2.0 and 3.0:

- ACCESSING SERVER SETTINGS VIA HIDDEN MENU

  1. On the remote controller, press and hold the SETTINGS button until a toast appears in the upper right corner to notify that your input has been received.

  2. Enter 8080, and press the OK button.

For LG WebOS 3.2+ and 4.0+: 

- ACCESSING SERVER SETTINGS VIA MENU

  1. On the remote controller, press the SETTINGS button

  2. Select Ez Setting > SI Server Setting

For all LG WebOS for Signage Displays (2.0, 3.0, 3.2+, 4.0+, 6.0):

- SETTING SERVER SETTINGS FOR EMBED SIGNAGE

  1. Set ‘Application Launch Mode’ to ‘Local’

  2. Set ‘Fully Qualified Domain Name’ to ‘On’

  3. Enter the domain as ‘http://embed.cloud/lg/embed.zip’

  4. Set ‘Application Type’ to ‘ZIP’

  5. Set ‘Local Application Upgrade’ to ‘REMOTE’ a pop up should show to upgrade app. Press ‘Confirm’ if your device is connected to the internet and everything is working as it should it should say ‘Upgrade Completed’

  6. Reboot your device - the application will now install and embed signage will run

Did this answer your question?