# embed signage

> Welcome to embeducation, a place to learn all about using embed signage

## General

- [Getting Started with embed signage](http://support.embedsignage.com/en/articles/1731288-getting-started-with-embed-signage.md): New to embed signage? Here's a quick 'get started' guide to help you on your way.
- [Terminology / Glossary](http://support.embedsignage.com/en/articles/780564-terminology-glossary.md): Here we list the basic terminology used throughout embed signage
- [What happens if a device looses network connection?](http://support.embedsignage.com/en/articles/827530-what-happens-if-a-device-looses-network-connection.md): This article describes the events that occur when a device looses connection to embed signage.
- [What is the Storage Limit on my account?](http://support.embedsignage.com/en/articles/867738-what-is-the-storage-limit-on-my-account.md): There is a limit to the amount of storage space available on accounts, but don't worry, you can always increase the capacity if you need it!
- [How to create and move items to a folder](http://support.embedsignage.com/en/articles/846794-how-to-create-and-move-items-to-a-folder.md): This article explains how to use folders within the embed signage UI.
- [How to purchase licenses](http://support.embedsignage.com/en/articles/698093-how-to-purchase-licenses.md): This article describes how licenses can be purchased, quantity discounts and license terms.
- [embed signage - The Dashboard](http://support.embedsignage.com/en/articles/14197440-embed-signage-the-dashboard.md): This article runs through the embed signage CMS dashboard features helping you gain quick insights and perform actions for your digital signage network.

## Devices

- [Overview of Devices](http://support.embedsignage.com/en/articles/1202627-overview-of-devices.md): Article for a full run through of the devices page
- [How do I register a device to my account?](http://support.embedsignage.com/en/articles/868097-how-do-i-register-a-device-to-my-account.md): This article describes how to add a device to your account.
- [What devices can I use with embed signage?](http://support.embedsignage.com/en/articles/867841-what-devices-can-i-use-with-embed-signage.md): Here you'll find a list of the supported device platforms for you to use with embed signage.
- [How and why to set the Device Location](http://support.embedsignage.com/en/articles/1206110-how-and-why-to-set-the-device-location.md): Setting the device location is not just for vanity, it has some very real and practical uses when it comes to content too.
- [Device Controller](http://support.embedsignage.com/en/articles/2096837-device-controller.md): Establish a real-time connection to your device for screenshots, reboots, logs and more.
- [How to update Windows, Mac, BrightSign and LG applications](http://support.embedsignage.com/en/articles/2962011-how-to-update-windows-mac-brightsign-and-lg-applications.md): Updating to the latest embed application is easy - just ensure your device is online when you do it.
- [What Chromium/WebKit Version does my device run?](http://support.embedsignage.com/en/articles/9626818-what-chromium-webkit-version-does-my-device-run.md): Devices run various versions of WebKit / Chromium versions for HTML playback. Here we've outlined the what we know about device versions.
- [What is Device State and how to update it?](http://support.embedsignage.com/en/articles/9896876-what-is-device-state-and-how-to-update-it.md): When operating digital signage roll outs, use Device State to categorise where each device is in the roll out process.
- [Bulk Import to Register Devices](http://support.embedsignage.com/en/articles/10904520-bulk-import-to-register-devices.md): Users can bulk register devices using the Bulk Import feature in the devices page. Here's how.
- [Install embed signage on ChromeOS in Kiosk mode \(Progressive Web App PWA\)](http://support.embedsignage.com/en/articles/661131-install-embed-signage-on-chromeos-in-kiosk-mode-progressive-web-app-pwa.md): Here we detail how to set up a ChromeOS device to run embed signage in kiosk mode for digital signage deployments.
- [Install and run embed signage on Windows](http://support.embedsignage.com/en/articles/666666-install-and-run-embed-signage-on-windows.md): This article will guide you though how to run the embed signage player software on a Windows device
- [Run the Windows app in Kiosk Mode](http://support.embedsignage.com/en/articles/1661012-run-the-windows-app-in-kiosk-mode.md): Follow these steps to launch the Windows app v4.0.3+ in Kiosk Mode - no pop ups, no windows notifications, no windows desktop!
- [Install Flash for Windows](http://support.embedsignage.com/en/articles/513692-install-flash-for-windows.md): To display Flash content within layouts via the website widget on Windows follow these steps.
- [Update Windows App 4.0.1 / 4.0.2 to 4.0.3](http://support.embedsignage.com/en/articles/1617652-update-windows-app-4-0-1-4-0-2-to-4-0-3.md): Follow these steps to update the Windows app v4.0.1 or v4.0.2 to v4.0.3
- [How to run embed across multiple displays on Windows OS device](http://support.embedsignage.com/en/articles/8712979-how-to-run-embed-across-multiple-displays-on-windows-os-device.md): Windows OS devices that can output to multiple displays can be used with embed as a single player. Here's how to set up the outputs.
- [Logs from Windows App](http://support.embedsignage.com/en/articles/10632663-logs-from-windows-app.md): If you want to obtain the embed signage app logs on a Windows PC, this is where you can find it.
- [How to set up embed signage on LG WebOS Displays \(2.0, 3.0, 3.2+, 4.0+, 6.0 and 8.0\)](http://support.embedsignage.com/en/articles/1202475-how-to-set-up-embed-signage-on-lg-webos-displays-2-0-3-0-3-2-4-0-6-0-and-8-0.md): Use embed signage with WebOS for Signage displays running 2.0+ and above - here's how you need to configure the device to run embed signage.
- [How to use a USB storage device with Samsung Tizen Smart Signage Platform Screens](http://support.embedsignage.com/en/articles/5945752-how-to-use-a-usb-storage-device-with-samsung-tizen-smart-signage-platform-screens.md): To increase the storage capacity on a Samsung Smart Signage Platform 4.0+ Tizen display, you can use a USB storage device.
- [Set up a Samsung SSSP v5 or v6 TIZEN Display](http://support.embedsignage.com/en/articles/1575752-set-up-a-samsung-sssp-v5-or-v6-tizen-display.md): Follow these steps to setup a Samsung Smart Signage Platform Tizen V5+ display.
- [Set up TIZEN Samsung Smart Signage Platform Display \(SSSP v4\)](http://support.embedsignage.com/en/articles/513657-set-up-tizen-samsung-smart-signage-platform-display-sssp-v4.md): Follow these steps to set up a TIZEN Display with embed signage for the first time.
- [Set up an E Series Samsung Smart Signage Platform Display \(SSSP v3\)](http://support.embedsignage.com/en/articles/853227-set-up-an-e-series-samsung-smart-signage-platform-display-sssp-v3.md): Guidance on setting up a DB-E, DM-E, DH-E, OM-W or OM-K display for the first time with embed signage
- [Set up a D Series Samsung Smart Signage Platform Display \(SSSP v2\)](http://support.embedsignage.com/en/articles/853242-set-up-a-d-series-samsung-smart-signage-platform-display-sssp-v2.md): Guidance on setting up a DB-D, DM-D, DH-D display for the first time with embed signage
- [How to enable Time Sync for SSSP and Tizen Devices](http://support.embedsignage.com/en/articles/1818596-how-to-enable-time-sync-for-sssp-and-tizen-devices.md): To keep SSSP and Tizen devices time / date up to date, you can sync them with the embed signage servers.
- [Set up a Samsung Tizen 7 display](http://support.embedsignage.com/en/articles/8658767-set-up-a-samsung-tizen-7-display.md): Follow these steps to configure Samsung Tizen 7 displays with embed
- [How to install and run embed signage on macOS](http://support.embedsignage.com/en/articles/666685-how-to-install-and-run-embed-signage-on-macos.md): Install and run embed signage on macOS devices.
- [Install Flash for Mac](http://support.embedsignage.com/en/articles/661209-install-flash-for-mac.md): To display Flash content within layouts via the website widget on Windows follow these steps.
- [How to run embed signage on a ONELAN NTB Subscriber](http://support.embedsignage.com/en/articles/661167-how-to-run-embed-signage-on-a-onelan-ntb-subscriber.md): Follow these steps to set up a ONELAN media player for use with embed signage.
- [How to use RS232 with ONELAN to turn displays on / off](http://support.embedsignage.com/en/articles/1646959-how-to-use-rs232-with-onelan-to-turn-displays-on-off.md): This article will show you how to configure the RS232 plugin with ONELAN devices to turn connected displays on / off
- [How to install and run embed signage on iOS devices](http://support.embedsignage.com/en/articles/661194-how-to-install-and-run-embed-signage-on-ios-devices.md): Using an iPhone or iPad for digital signage? This article will show you how to install and run embed signage on your device
- [Run embed signage in Kiosk / Single App Mode for iOS devices.](http://support.embedsignage.com/en/articles/867754-run-embed-signage-in-kiosk-single-app-mode-for-ios-devices.md): This article explains how to set up guided access mode on iOS to run embed signage in Kiosk Mode.
- [Philips D-Line and Q-Line Android 8 OS tips](http://support.embedsignage.com/en/articles/5477364-philips-d-line-and-q-line-android-8-os-tips.md): When using Android 8 OS D-Line or Q-Line Philips Digital Signage panels with embed, here are some tips for best use.
- [How to find what version Android App your device needs](http://support.embedsignage.com/en/articles/4240363-how-to-find-what-version-android-app-your-device-needs.md): The Android 4.0.2+ comes in various versions to suit the Android device you are using. Here's how to identify which apk is right for you.
- [How to enable Native video playback on Android.](http://support.embedsignage.com/en/articles/4456189-how-to-enable-native-video-playback-on-android.md): For improved stability of video playback for certain Android devices, enable the Native video playback option.
- [How to install and run embed signage on IAdea, ViewSonic & Planar Android players](http://support.embedsignage.com/en/articles/2282728-how-to-install-and-run-embed-signage-on-iadea-viewsonic-planar-android-players.md): See how to install embed signage and set it top automatically run on an IAdea, ViewSonic or Planar Android player.
- [How to run embed signage on Android](http://support.embedsignage.com/en/articles/1206080-how-to-run-embed-signage-on-android.md)
- [How to set up a Vestel MB400 Android 9 SoC Panel with embed](http://support.embedsignage.com/en/articles/8825929-how-to-set-up-a-vestel-mb400-android-9-soc-panel-with-embed.md): Setting up a Vestel MB400 Android SoC display with embed? Follow these steps to get set up easily.
- [How to setup a Sony BRAVIA Professional Android 10+ Display with embed](http://support.embedsignage.com/en/articles/8856804-how-to-setup-a-sony-bravia-professional-android-10-display-with-embed.md): embed supports Sony BRAVIA Professiona Displays running Android 10+, here's how to configure these to run embed
- [Known Issues / Caveats with Sony BRAVIA Professional Android 10+ Displays](http://support.embedsignage.com/en/articles/8856841-known-issues-caveats-with-sony-bravia-professional-android-10-displays.md): This article identifies known issues, limitations and caveats when using Sony BRAVIA Professional Android 10+ Displays with embed signage
- [How to set up a BrightSign player via SD or BSN.cloud](http://support.embedsignage.com/en/articles/1884966-how-to-set-up-a-brightsign-player-via-sd-or-bsn-cloud.md): How to set up a BrightSign player to run embed signage. Compatible models XT3 and HO, HS, LS, HD, XD, XT, XC 4 and 5 series
- [How to enable Native video playback on BrightSign Players and set Video Placement](http://support.embedsignage.com/en/articles/4456222-how-to-enable-native-video-playback-on-brightsign-players-and-set-video-placement.md): If you want to use 4K portrait video content on BrightSign players you will need to enable the Native Video Playback - here's how.
- [BrightSign XC5 Series - Bezel Compensation Settings](http://support.embedsignage.com/en/articles/6717990-brightsign-xc5-series-bezel-compensation-settings.md): With BrightSign XC5 Series \(XC2055 and XC 4055\) multi output players, you can create layouts for video walls and apply bezel compensation.
- [How to change output resolution on BrightSign players](http://support.embedsignage.com/en/articles/3688226-how-to-change-output-resolution-on-brightsign-players.md): Updating the video mode \(resolution\) for BrightSign via embed signage.
- [BrightSign - Known Issues and Caveats](http://support.embedsignage.com/en/articles/8581687-brightsign-known-issues-and-caveats.md): This article identifies any known issues and caveats when using BrightSign players with embed signage.
- [How to Update a BrightSign Player App or Firmware Version](http://support.embedsignage.com/en/articles/8799376-how-to-update-a-brightsign-player-app-or-firmware-version.md): With embed signage, you can update BrightSign player firmware as well as embed app versions remotely via the CMS. Here's how
- [How to enable BrightSign's Chromium version \(BETA\) via Registry](http://support.embedsignage.com/en/articles/10702020-how-to-enable-brightsign-s-chromium-version-beta-via-registry.md): For Series 5 BrightSign devices on 9.0.168+ firmware, you can update the Chromium version \(BETA\) via a registry update. Here's how.

## Media / Assets

- [VIDEO: Overview of Media](http://support.embedsignage.com/en/articles/1202614-video-overview-of-media.md): Watch this tutorial video for a run through of the media section
- [How do I upload media?](http://support.embedsignage.com/en/articles/847055-how-do-i-upload-media.md): The article describes how to add media to your embed signage account.
- [Search Filter](http://support.embedsignage.com/en/articles/2082576-search-filter.md): A little bit more information regarding the media search filter
- [What media formats can be uploaded?](http://support.embedsignage.com/en/articles/846727-what-media-formats-can-be-uploaded.md): This article describes the media formats are able to be uploaded.
- [File Size Recommendations](http://support.embedsignage.com/en/articles/758967-file-size-recommendations.md): This article describes the recommended file sizes for optimum playback.

## Layout Builder / Content Creation

- [Layout Builder Overview](http://support.embedsignage.com/en/articles/1939077-layout-builder-overview.md): Find out the basics of the layout builder
- [VIDEO: Overview of Layouts](http://support.embedsignage.com/en/articles/1202631-video-overview-of-layouts.md): Watch this video to learn all about creating Layouts
- [Overview: Pages](http://support.embedsignage.com/en/articles/704753-overview-pages.md): Learn the importance of pages when creating your digital signage content.
- [Overview: Zones](http://support.embedsignage.com/en/articles/1681033-overview-zones.md): Everything you need to know about using zones in the Layout Builder.
- [What is a Zone?](http://support.embedsignage.com/en/articles/704765-what-is-a-zone.md): This article describes what a zone is.
- [How to add a new Zone](http://support.embedsignage.com/en/articles/1763332-how-to-add-a-new-zone.md): Learn how to add more zones to a layout
- [How to reorder Zones](http://support.embedsignage.com/en/articles/843452-how-to-reorder-zones.md): This article describes how to change the hierarchy of layers on a page or layout.
- [How to duplicate a Zone](http://support.embedsignage.com/en/articles/1763338-how-to-duplicate-a-zone.md)
- [How to delete a Zone](http://support.embedsignage.com/en/articles/1763348-how-to-delete-a-zone.md)
- [How to edit Zone settings](http://support.embedsignage.com/en/articles/842345-how-to-edit-zone-settings.md): Here we show you how to change the size, position and style of a zone as well as adding conditional play, animation and interactivity.
- [How do I add Content to a Zone?](http://support.embedsignage.com/en/articles/842215-how-do-i-add-content-to-a-zone.md): This article describes how to add content to a zone to start building your zone playlist. Tutorial video included.
- [Creating a playlist](http://support.embedsignage.com/en/articles/2037874-creating-a-playlist.md): Find out how to create a playlist which will show inside a zone
- [Overview of Playlist item settings](http://support.embedsignage.com/en/articles/1942811-overview-of-playlist-item-settings.md): Find out what each playlist item setting represents
- [Playlist Item - Text](http://support.embedsignage.com/en/articles/1942427-playlist-item-text.md): Find out how to add and customise a text playlist item
- [Playlist Item - Media](http://support.embedsignage.com/en/articles/1946642-playlist-item-media.md): Find out how to add a piece of media into your layout
- [VIDEO: Overview of Dynamic Media Item](http://support.embedsignage.com/en/articles/1202661-video-overview-of-dynamic-media-item.md): Watch this video to learn how to use the Dynamic Media Item feature
- [VIDEO: Overview of Global Playlists](http://support.embedsignage.com/en/articles/1202641-video-overview-of-global-playlists.md): Watch this video to learn all about Global Playlists
- [How to add a Background Colour or Image to a Layout, Page and Zone](http://support.embedsignage.com/en/articles/1664368-how-to-add-a-background-colour-or-image-to-a-layout-page-and-zone.md): This article will show you how to add a background image or colour to an entire layout, individual page and zone
- [Text formatting](http://support.embedsignage.com/en/articles/1696960-text-formatting.md): Find out how to format text within layouts
- [How to use Content Triggers](http://support.embedsignage.com/en/articles/1660790-how-to-use-content-triggers.md): Learn how to trigger specific content at specific times using content triggers in the layout builder
- [Play, Pause and Restart actions](http://support.embedsignage.com/en/articles/10398329-play-pause-and-restart-actions.md): Using the play, pause and restart actions you are able to design engaging digital experiences.
- [Creating Interactive Touch Content](http://support.embedsignage.com/en/articles/529850-creating-interactive-touch-content.md): Learn what touch interactive options are available to use in the layout builder
- [Device interactions](http://support.embedsignage.com/en/articles/6092468-device-interactions.md): Find out how to configure device interactions to control the content on other devices.
- [Create a Layout for both Portrait & Landscape](http://support.embedsignage.com/en/articles/523281-create-a-layout-for-both-portrait-landscape.md): Learn how to quickly create a layout for both portrait and landscape orientations.
- [Geo-fencing Conditional Play: what it is and how to use it.](http://support.embedsignage.com/en/articles/5613472-geo-fencing-conditional-play-what-it-is-and-how-to-use-it.md): Here's how the Geo-fencing conditional play feature works and how you can set it up for various uses.
- [Overview: Conditional Play](http://support.embedsignage.com/en/articles/1684934-overview-conditional-play.md): Conditional play is a feature that allows rules to be set for when content is eligible to be shown within a layout.
- [Conditional Play - Pages](http://support.embedsignage.com/en/articles/1686073-conditional-play-pages.md): Find out how to use conditional play on pages.
- [Conditional Play - Zones](http://support.embedsignage.com/en/articles/1689592-conditional-play-zones.md): Find out how to use conditional play on zones
- [Conditional Play - Playlist Items](http://support.embedsignage.com/en/articles/1689736-conditional-play-playlist-items.md): Find out how to use conditional play on playlist items.
- [Overview of Media Tag Rules](http://support.embedsignage.com/en/articles/1202656-overview-of-media-tag-rules.md): Media Tag Rules allow you to specify rules to control what media a specific device will play from a layout or playlist.
- [Quividi Audience Data Conditional Play - Dynamic Control of Content by Audience Data](http://support.embedsignage.com/en/articles/13449441-quividi-audience-data-conditional-play-dynamic-control-of-content-by-audience-data.md): This guide explains how to use the Quividi integration with embed signage's conditional play feature. This allows you to dynamically control content playback based on real-time audience data from Q...

## Channels / Distribute Content

- [Overview: Channel Sync](http://support.embedsignage.com/en/articles/3018935-overview-channel-sync.md): How to set up and use the channel sync feature. This allows content to be played on multiple devices at the same time.
- [Overview of Channels](http://support.embedsignage.com/en/articles/1202647-overview-of-channels.md): To distribute content to your device\(s\), you need to use Channel\(s\). This article covers everything you need to use the Channel features.
- [Channels - Schedules](http://support.embedsignage.com/en/articles/2052967-channels-schedules.md): Schedule different layouts to show depending on days and times of the week
- [Channels - Overrides](http://support.embedsignage.com/en/articles/2065903-channels-overrides.md): By setting an override you can show a layout for a specified date period

## Users

- [Microsoft Entra ID SSO not automatically logging in once configured - SSO Issues](http://support.embedsignage.com/en/articles/7007449-microsoft-entra-id-sso-not-automatically-logging-in-once-configured-sso-issues.md): embed supports IdP initiated sign on only. Please remove the Sign on URL option in Basic SAML Configuration section in Entra ID
- [How to setup Authenticator Apps for Two Factor Authentication \(2FA\) login](http://support.embedsignage.com/en/articles/5460821-how-to-setup-authenticator-apps-for-two-factor-authentication-2fa-login.md): By default, 2FA codes are sent via email however users can switch to using authenticator apps. Here's how to set that up.
- [Single sign-on & User provisioning with Microsoft Entra ID \(formerly Azure Active Directory\)](http://support.embedsignage.com/en/articles/5603501-single-sign-on-user-provisioning-with-microsoft-entra-id-formerly-azure-active-directory.md): Set up single sign-on and user provisioning with Microsoft Entra ID \(formerly Azure Active Directory\).
- [How to add a new user](http://support.embedsignage.com/en/articles/510443-how-to-add-a-new-user.md): Here we guide you through how to create a new user on an account.
- [Enable / Disable Two Factor Authentication \(2FA\) for an account as an Adminstrator](http://support.embedsignage.com/en/articles/5387880-enable-disable-two-factor-authentication-2fa-for-an-account-as-an-adminstrator.md): As an administrator of an account, you can choose to enable/disable 2FA login for all users. Here's how you can manage that feature.
- [Single Sign-On & User Provisioning with Okta](http://support.embedsignage.com/en/articles/5603057-single-sign-on-user-provisioning-with-okta.md): Set up single sign-on and user provisioning with Okta
- [How to create user roles](http://support.embedsignage.com/en/articles/510535-how-to-create-user-roles.md): Here you will discover how to create user roles with different levels of access to an account.
- [User Activity Logs](http://support.embedsignage.com/en/articles/14210360-user-activity-logs.md): See all user activity on your account, held for 90 days and export to CSV. Quickly filter by users, action and categories and for specific date periods.

## Plugins & Widgets

- [How to use the Custom Apps feature](http://support.embedsignage.com/en/articles/9576457-how-to-use-the-custom-apps-feature.md): Custom Apps allows you to upload HTML packages and distribute them to your devices via playlists or layouts.
- [Custom Apps Device Playback support](http://support.embedsignage.com/en/articles/9448654-custom-apps-device-playback-support.md): Custom Apps is currently supported on Windows, BrightSign, macOS, Android and iOS devices.
- [Show Social Media Feeds on your Digital Signage](http://support.embedsignage.com/en/articles/12867990-show-social-media-feeds-on-your-digital-signage.md): Integrate your Facebook, Instagram, LinkedIn and X \(Twitter\) accounts for dynamic content updates on your Digital Signage displays with embed signage.
- [How to use Google Maps app on your Digital Signage](http://support.embedsignage.com/en/articles/9626786-how-to-use-google-maps-app-on-your-digital-signage.md): Use the Google Maps content app to display locations, live traffic, bicycle routes and London, UK transit links.
- [Show Microsoft SharePoint News on your Digital Signage](http://support.embedsignage.com/en/articles/12621545-show-microsoft-sharepoint-news-on-your-digital-signage.md): Integrate your Microsoft SharePoint News site for dynamic content updates on your Digital Signage displays with embed signage.
- [Show Microsoft Teams Channel Posts on your Digital Signage](http://support.embedsignage.com/en/articles/12639412-show-microsoft-teams-channel-posts-on-your-digital-signage.md): Integrate your Microsoft Teams Channels for dynamic content updates on your Digital Signage displays with embed signage.
- [How to display a Microsoft Power BI Dashboard or Report with embed](http://support.embedsignage.com/en/articles/4884352-how-to-display-a-microsoft-power-bi-dashboard-or-report-with-embed.md): Here you'll learn how to link a Power BI account to securely display Reports or Dashboards on your Digital Signage Screens via embed signage
- [What Devices does the Power BI Integration work with?](http://support.embedsignage.com/en/articles/9561002-what-devices-does-the-power-bi-integration-work-with.md): See which devices you can run Power BI reports on via embed signage.
- [Show MRSS Feeds on your Digital Signage](http://support.embedsignage.com/en/articles/12751972-show-mrss-feeds-on-your-digital-signage.md): Showcase MRSS Feeds for dynamic content updates on your Digital Signage displays with embed signage.
- [Weather](http://support.embedsignage.com/en/articles/1206005-weather.md): See how to add and customise the weather widget to show today's weather and forecast data
- [Sky News Live](http://support.embedsignage.com/en/articles/3815052-sky-news-live.md): Display live news with this widget from Sky News.
- [YouTube \(Live, single video and playlists\)](http://support.embedsignage.com/en/articles/1456200-youtube-live-single-video-and-playlists.md): Use the YouTube widget to play videos and live streams directly from YouTube
- [Date](http://support.embedsignage.com/en/articles/1206003-date.md): Display the device date on your digital signage content.
- [Time \(Analogue and Digital\)](http://support.embedsignage.com/en/articles/1206002-time-analogue-and-digital.md): Display the device time on your digital signage device.
- [How to add and edit Analogue Clocks in the Time Widget](http://support.embedsignage.com/en/articles/5338078-how-to-add-and-edit-analogue-clocks-in-the-time-widget.md): In the time widget, there is the option to show a preset or custom Analogue clock. Here's all you need to know.
- [TFL Tube Status \(London Underground\)](http://support.embedsignage.com/en/articles/1459549-tfl-tube-status-london-underground.md): Show live London Underground Tube Status information in your layouts with this widget.
- [X \(Twitter\) Widget \(Updated: Please use Social Feed content app\)](http://support.embedsignage.com/en/articles/1206009-x-twitter-widget-updated-please-use-social-feed-content-app.md): ​Updated: Please use the Social Feed content app for X \(Twitter\), Instagram, Facebook and LinkedIn.
- [RSS / Text Scroller Widget](http://support.embedsignage.com/en/articles/1206008-rss-text-scroller-widget.md): Learn how to add and customise the RSS / Text scroller widget
- [Website Widget](http://support.embedsignage.com/en/articles/888652-website-widget.md): See how to use and configure the website widget to display website content in your layouts
- [IPTV \(HLS and UDP\)](http://support.embedsignage.com/en/articles/1206015-iptv-hls-and-udp.md): Use this widget to display your UDP and HLS streams on your signage displays.
- [Source Input \(HDMI in\)](http://support.embedsignage.com/en/articles/1206019-source-input-hdmi-in.md): Use this widget to display an external source such as HDMI into a zone. Widget is device specific
- [Travel Boards Content App](http://support.embedsignage.com/en/articles/14718988-travel-boards-content-app.md): Display UK National Rail and TfL travel information on your Digital Signage screens in a few clicks.
- [Dynamic Data Plugin](http://support.embedsignage.com/en/articles/1206030-dynamic-data-plugin.md): Dynamic Data allows users to extract data from Excel/CSV, JSON, XML, Google Sheets or Tabular Webpages and display this in their layouts.
- [External Communications Plugin](http://support.embedsignage.com/en/articles/1646783-external-communications-plugin.md): The External Communications plugin allows users to communicate with external devices via RS232 or TCP.
- [How to set up a TCP connection using the External Communications Plugin](http://support.embedsignage.com/en/articles/2968831-how-to-set-up-a-tcp-connection-using-the-external-communications-plugin.md): Learn how to set up a TCP \(Transmission Control Protocol\) connection using the External Communications Plugin
- [VIDEO: Room Booking Plugin](http://support.embedsignage.com/en/articles/1205972-video-room-booking-plugin.md): Watch this video to learn how to use the Room Booking Plugin
- [How to display Seenspire feeds via the Seenspire widget](http://support.embedsignage.com/en/articles/4714588-how-to-display-seenspire-feeds-via-the-seenspire-widget.md): Seenspire delivers relevant, dynamic & engaging content via URL content feeds. Here's how you can get that feed onto your signage with embed
- [Google Sheets with Dynamic Data](http://support.embedsignage.com/en/articles/5393897-google-sheets-with-dynamic-data.md): Display and update data from your Google sheet on your digital signage screens using embed signage.
- [Upload Excel File](http://support.embedsignage.com/en/articles/1834726-upload-excel-file.md): Display data from an excel spreadsheet using the Dynamic Data plugin
- [Upload JSON feed](http://support.embedsignage.com/en/articles/1865772-upload-json-feed.md): Display content from JSON feeds on your Digital Signage screens via the embed signage Dynamic Data plugin
- [Upload XML feed](http://support.embedsignage.com/en/articles/2093799-upload-xml-feed.md): Find out how to display data from an XML Feed on your Digital Signage screens using Dynamic Data in embed signage
- [Upload webpage tabular data](http://support.embedsignage.com/en/articles/2943721-upload-webpage-tabular-data.md): Find out how to display data from a webpage using the Dynamic Data plugin
- [Add to Layout](http://support.embedsignage.com/en/articles/1843233-add-to-layout.md): Follow these steps to add your dynamic data to your layout
- [Format data](http://support.embedsignage.com/en/articles/1851248-format-data.md): Find out how you can format the data you have added to your Layout
- [Updating Data](http://support.embedsignage.com/en/articles/2093663-updating-data.md): Find out how to update your data when using the Dynamic Data plugin
- [Queries Explained](http://support.embedsignage.com/en/articles/1852123-queries-explained.md): This article will list and explain all of the queries available within the dynamic data configuration settings
- [Formatting Fields](http://support.embedsignage.com/en/articles/1859270-formatting-fields.md): You can pre-determine a datas format depending on the data by formatting the field.
- [Add custom columns](http://support.embedsignage.com/en/articles/1843012-add-custom-columns.md): Associate media or a webpage to a row of data by adding custom columns
- [Device Specific Data](http://support.embedsignage.com/en/articles/1888921-device-specific-data.md): Show specific data on a specific device\(s\) all from one source and one layout by following these steps

## Account Settings

- [Alerts & Notifications](http://support.embedsignage.com/en/articles/2543882-alerts-notifications.md): Receive alerts and notifications for devices going offline, coming back online or dynamic data import failure
- [VIDEO: Overview of Account Settings](http://support.embedsignage.com/en/articles/1202667-video-overview-of-account-settings.md): Watch this video for an overview of the Account Settings section
- [How to add fonts](http://support.embedsignage.com/en/articles/1203363-how-to-add-fonts.md): Upload your own .otf or .ttf font files to use on your account.
- [Manage License Notification emails](http://support.embedsignage.com/en/articles/13638670-manage-license-notification-emails.md): Manage who receives license notification emails on your account.

## Technical and Security

- [Networking, Firewalls, Ports and Topology](http://support.embedsignage.com/en/articles/853153-networking-firewalls-ports-and-topology.md): All the information you need about using embed signage on your chosen network
- [What browser can I use?](http://support.embedsignage.com/en/articles/853141-what-browser-can-i-use.md): To use embed signage, we recommend you use Chrome but you can also use other browsers.

## Troubleshooting

- [I have no sound.](http://support.embedsignage.com/en/articles/3686778-i-have-no-sound.md): If you have a content with audio but you're not hearing anything, check these areas to be sure your content is setup correctly.
- [The Device Resolution doesn't seem correct on the Devices page in embed](http://support.embedsignage.com/en/articles/6205403-the-device-resolution-doesn-t-seem-correct-on-the-devices-page-in-embed.md): You've set up your screen and expect it to be 4K but wait... it's showing a different resolution in embed - here are some things to check.
- [Update Samsung TIZEN 3.0 / SSSP v5 display firmware via USB](http://support.embedsignage.com/en/articles/1966106-update-samsung-tizen-3-0-sssp-v5-display-firmware-via-usb.md)
- [Offline Device](http://support.embedsignage.com/en/articles/2179826-offline-device.md): Find out how to get your device back online
- [Android device offline](http://support.embedsignage.com/en/articles/2642992-android-device-offline.md): Is your Android device offline?
- [Chrome device offline](http://support.embedsignage.com/en/articles/2642768-chrome-device-offline.md): Is your Chrome device offline?
- [LG WebOS device offline](http://support.embedsignage.com/en/articles/3608062-lg-webos-device-offline.md): Is your LG WebOS device offline?
- [Mac OS offline](http://support.embedsignage.com/en/articles/2949535-mac-os-offline.md): Is your Mac OS device offline?
- [Samsung SSP \(v2 or v3\) Offline](http://support.embedsignage.com/en/articles/2579612-samsung-ssp-v2-or-v3-offline.md): Is your Samsung SSP device offline?
- [Samsung Tizen SSP \(v4+\) Offline](http://support.embedsignage.com/en/articles/2413191-samsung-tizen-ssp-v4-offline.md): Is your Samsung Tizen device offline?
- [Windows device offline](http://support.embedsignage.com/en/articles/2639501-windows-device-offline.md): Is your Windows device offline?
- [Why is the Device Controller not working?](http://support.embedsignage.com/en/articles/1205986-why-is-the-device-controller-not-working.md): If you are using the device controller feature but find it is not working, here are a few steps to help troubleshoot.
- [Why is my video not playing?](http://support.embedsignage.com/en/articles/868413-why-is-my-video-not-playing.md): Here are some things to check if you're having issues with video playback on a device.
- [Why are my schedules not working?](http://support.embedsignage.com/en/articles/778323-why-are-my-schedules-not-working.md): This article describes possible solutions to scheduling issues.
- [Not downloading files after Windows app update from 3.4.2 to 4.0.\*](http://support.embedsignage.com/en/articles/868464-not-downloading-files-after-windows-app-update-from-3-4-2-to-4-0.md): Some Windows devices have encountered small download errors if updating from v3.4.2, here we show you how to get back up and running.
- [Why is my website not showing?](http://support.embedsignage.com/en/articles/1202348-why-is-my-website-not-showing.md): Using the website widget it is possible to show a website within a zone in a layout, however not all websites will display.
- [Update Samsung Tizen SSSP v4 \(Tizen v2.4\) display to 2160.1 manually via USB](http://support.embedsignage.com/en/articles/589536-update-samsung-tizen-sssp-v4-tizen-v2-4-display-to-2160-1-manually-via-usb.md): Step by step guide to manually update SSSP v4 screens to 2160.1 firmware via USB.
- [Troubleshooter - Remote Troubleshoot Devices](http://support.embedsignage.com/en/articles/8713157-troubleshooter-remote-troubleshoot-devices.md): Some platforms support remote troubleshooting, in which case you'll be able to remotely wipe files and relaunch the embed app at the click of a button.
- [YouTube / Sky News Error 153](http://support.embedsignage.com/en/articles/12741830-youtube-sky-news-error-153.md): Details about Error 153 video configuration error on YouTube and Sky News apps in embed signage.

## Analytics

- [Getting Started With Analytics](http://support.embedsignage.com/en/articles/3522247-getting-started-with-analytics.md): How to get started using analytics with the embed signage platform. Track impressions, interactive sessions and more.
- [Devices](http://support.embedsignage.com/en/articles/3522317-devices.md): Track stats and see analytics for device specific data.
- [Impressions](http://support.embedsignage.com/en/articles/3522320-impressions.md): Track playback statistics for your content.
- [Interactions](http://support.embedsignage.com/en/articles/3522321-interactions.md): Track and monitor interaction sessions for touch layouts.
- [How to enable Impression Tracking for content a.k.a. Proof of Play](http://support.embedsignage.com/en/articles/3542520-how-to-enable-impression-tracking-for-content-a-k-a-proof-of-play.md): To track how many times content plays, you need to enable Analytics tracking. This article shows you how.
- [Filtering Data](http://support.embedsignage.com/en/articles/3522329-filtering-data.md): How to filter your analytics data.
- [Does Analytics require any network / firewall routing?](http://support.embedsignage.com/en/articles/3684038-does-analytics-require-any-network-firewall-routing.md): Analytics connects via a specific domain and IP. Both the device and UI must have access to this in order to function correctly.
- [My Analytics Isn't Tracking](http://support.embedsignage.com/en/articles/3522337-my-analytics-isn-t-tracking.md): Debugging why a device may not be tracking analytics data.
- [Export Analytics Data Reports](http://support.embedsignage.com/en/articles/3522336-export-analytics-data-reports.md): Export your data into Excel and CSV using our pre-defined reports including detailed impression logs.

## External Communcations

- [How to enable UDP and TCP incoming connections on Windows](http://support.embedsignage.com/en/articles/6166017-how-to-enable-udp-and-tcp-incoming-connections-on-windows.md)
- [How to set up an RS232 connection with a BrightSign device and embed signage](http://support.embedsignage.com/en/articles/5982150-how-to-set-up-an-rs232-connection-with-a-brightsign-device-and-embed-signage.md): Here we'll show you how to connect RS232 devices with embed running on BrightSign to send + receive commands.
- [How to find the COM port for connected devices on Windows OS](http://support.embedsignage.com/en/articles/6205456-how-to-find-the-com-port-for-connected-devices-on-windows-os.md)
- [How to find the COM port for connected devices on macOS](http://support.embedsignage.com/en/articles/6205463-how-to-find-the-com-port-for-connected-devices-on-macos.md)
- [How to set up an RS232 connection with a macOS device and embed signage](http://support.embedsignage.com/en/articles/5978027-how-to-set-up-an-rs232-connection-with-a-macos-device-and-embed-signage.md): Here we'll show you how to connect RS232 devices with embed running on macOS to send + receive commands.
- [How to set up an RS232 connection with a Windows device and embed signage](http://support.embedsignage.com/en/articles/5948456-how-to-set-up-an-rs232-connection-with-a-windows-device-and-embed-signage.md): Here we'll show you how to connect RS232 devices with embed running on Windows to send + receive commands.
- [How to set up a TCP connection with a Windows, BrightSign or macOS device and embed signage](http://support.embedsignage.com/en/articles/5982705-how-to-set-up-a-tcp-connection-with-a-windows-brightsign-or-macos-device-and-embed-signage.md): Here we'll show you how to send and receive TCP communication with embed signage devices running on Windows, BrightSign and macOS.
- [How to set up a UDP connection with a Windows, BrightSign or macOS device and embed signage](http://support.embedsignage.com/en/articles/5982214-how-to-set-up-a-udp-connection-with-a-windows-brightsign-or-macos-device-and-embed-signage.md): Here we'll show you how to send and receive UDP communication with embed signage devices running on Windows, BrightSign and macOS.
- [How to setup GPIO with Brightsign and embed](http://support.embedsignage.com/en/articles/6158515-how-to-setup-gpio-with-brightsign-and-embed.md)
- [How to use keyboard inputs to control content within a layout](http://support.embedsignage.com/en/articles/5945060-how-to-use-keyboard-inputs-to-control-content-within-a-layout.md): Using a keyboard input can be an easy way to control content within embed from an external input, here's how to use it.
- [How to set up a Nexmosphere Demo Board DM-XN04E with embed signage](http://support.embedsignage.com/en/articles/6259034-how-to-set-up-a-nexmosphere-demo-board-dm-xn04e-with-embed-signage.md): Use embed signage & the DM-XN04E board to demo RFID Lift/Place + Learn, Presence/ Proximity detection, Buttons, Snapper and LED control

## RoomStream

- [RoomStream: Complete Setup Guide](http://support.embedsignage.com/en/articles/13493123-roomstream-complete-setup-guide.md): Stream full-screen signage to Microsoft Teams Rooms and Zoom Rooms between meetings.
- [Setting up RoomStream with Microsoft Teams Rooms](http://support.embedsignage.com/en/articles/13515824-setting-up-roomstream-with-microsoft-teams-rooms.md): Stream full-screen signage to Microsoft Teams Rooms between meetings using embed signage RoomStream
- [Setting up RoomStream with Zoom Rooms](http://support.embedsignage.com/en/articles/13515492-setting-up-roomstream-with-zoom-rooms.md): Stream full-screen signage to Zoom Rooms between meetings using embed signage RoomStream